|(24 intermediate revisions by 2 users not shown)|
|−|== TSD == |+|
|−|All sensitive data must be stored on TSD. | |
| || |
|−|== File servers for non-sensitive data == |+|
| || |
Connect to server outside the lab = == |+|
|−|The humlab file server is intended to provide research projects with disk storage and group-level access to datasets that are recorded in the lab. You will need your '''project id''' that was mailed to you when registering a project in the lab. Connect to the humlab server through the following steps: | |
|−|* All '''wired internet connections within Lund University''' should work. If you use a wireless connection, you need to connect to the '''eduroam wireless network'''. Outside the university, you need to start a '''VPN client''' to connect. | |
|−|* Connect with your <project id>. On Windows, you can click on the Start menu, and enter '''\\srv2.humlab.lu.se\<project id>$''' in the search bar. On Mac OS X, you can use the Finder menu called Go, and select Connect to server. A search bar will appear where you enter '''smb://srv2.humlab.lu.se/<project id>$'''. Dont forget to add the $-sign after your project id. | |
|−|* When you connect to the file server, you will be prompted to enter your LUCAT credentials. On Windows, you need to prefix you username. Thus if your LUCAT username is <lucat id>, you would enter '''UW\<lucat id>''' as your username. If your computer has been added to the university domain, you might not need any authentication. | |
| || |
|−|=== Connect to server inside the lab === |+|
to the laband the the of . is of the it is to .
|−|The recording- and stimuluscomputers connected to the different measuring systems inside the lab are particularly sensitive to any kind of contaminated files. Due to this it is forbidden to connect any of these computers to the general network and it is also forbidden to connect any memorystick or external harddrive to these computers. | |
| || |
|−|However it is necessary to transfer stimulusfiles to the stimuluscomputers and to collect recorded data from the recordingcomputers. This is done by connecting to the humlab server. In each recording room in the lab there is a small router. This is connected to a secure network that only connects the routers in the rooms with a secure channel to the server. |+|
is to data is to . is . is .
| || |
|−|When it is necessary to connect the recording or stimuluscomputers to the server, make sure to connect them through one of the two free connections in the router. All of the windows computers has a connectionscript that needs to be run in order to connect. There is a shortcut on the desktop called "shortcut to humlab" that, when it is run, asks for project-id and lucat credentials. Once entered it connects to the server and mounts the project-folder as '''H:\''' |+|
to , the .
| || |
|−|In the two EEG- rooms it is necessary to first connect the router to the network. Connect the cable that is marked ACQ to the contact in the wall marked ACQ. The windows computers connects as above. On the mac, choose "Connect to server" from the Go-menu in the finder and write '''smb://10.75.76.1/<project id>$''' |+|
-is to to that in the .
|−|Then enter lucat-credentials with the prefix '''uw\''' before the lucat-id. | |
| || |
|−|If the loginscript doesn't work or is missing, it is possible to connect a windows computer to the server by typing '''\\10.75.76.1 \<project id>$''' in the "Search programs and files" field in the startmenu. Log in with the lucat credentials, once again with the prefix '''uw\''' before the lucat-id. |+|
| || |
Research begets data and where it resides depends on the nature of the data and timing of the project. You probably have one primary computer that you do your work on. On this computer you plan your lab activity and from this computer you will be handling the collected data afterwards. In the meantime you move data from the primary computer to the lab, conduct the experiments and move the data back. Depending on the nature of the data it will either end up on our network storage disk or the secure storage of TSD. How you move the data is also dependent on the requirements of security. If the data is unclassified, you can move it any way you like, but if the data is sensitive the transfer needs to be encrypted as well. You can borrow encrypted portable disks from the lab.
TSD is UiO's Storage solution for sensitive data. Any data that could be considered sensitive should end up here. Examples of this includes data containing information that can be linked to an individual or identifying an individual so that other data which is sensitive could be correlated to that individual. Most contact information to underaged persons is considered sensitive. Health and patient data is almost always sensitive.
The lab has five encrypted 1 TB IronKey USB harddrives for data recorded on our eyetracker system.
The hard drives can be borrowed from the lab.