|
|
(28 mellomliggende revisjoner av 3 brukere er ikke vist) |
Linje 1: |
Linje 1: |
− | === Getting ATLAS releases to work on RHEL5 x86_64 nodes ===
| + | <tt></tt> |
| | | |
− | *For pacman to work you need to install an older 32-bit opensll: <tt>rpm -ivh http://ftp.scientificlinux.org/linux/scientific/51/i386/SL/openssl097a-0.9.7a-9.i386.rpm</tt>
| + | === Installing ROOT with Jupyter notebook capability === |
− | *To satisfy some packages, especially event generation: <tt>yum install libgfortran-4.1.2-44.el5.i386</tt>
| + | * ROOT is in the EPEL repository (at UiO/FI this should already be set up) |
− | *You need to install blas: <tt>yum install blas.i386</tt> and <tt>yum install blas-devel.i386</tt>
| + | * sudo yum install root root-notebook python3-root python3-devel python3-jupyroot (an admin/superuser needs to do this) |
− | *To get /usr/lib/libreadline.so.4 (also needed for 32-bit Linux) do <tt>rpm -ivh http://linuxsoft.cern.ch/cern/slc5X/i386/SL/compat-readline43-4.3-3.i386.rpm</tt>
| + | * pip3 install --user jupyter juypterlab metakernel (this you can do as a normal user) |
− | *You need 32-bit gcc 3.4 (also needed for 32-bit Linux): <tt>yum install compat-gcc-34</tt>
| + | ** This will create ~/.local - later you can move the directory somewhere else and softlink to it, i.e. ln -s /scratch/.local ~/.local |
− | *You need 32-bit g++ 3.4 (also needed for 32-bit Linux): <tt>yum install compat-gcc-34-c++</tt>
| + | * Make sure ~/.local/bin is in your PATH |
− | *You may need to install 32-bit popt: <tt>yum install popt.i386</tt>
| |
− | | |
− | <br>
| |
− | | |
− | === Getting the I686-SLC5-GCC43 kits to validate (and run) on RHEL5 === | |
− | | |
− | *Install the pacman kit for gcc43, see https://twiki.cern.ch/twiki/bin/view/Atlas/RPMCompatSLC5#Run_SLC4_32bit_binaries_on_SLC5 | |
− | *You probably need to <tt>ln -s /usr/lib/libg2c.so.0.0.0 /usr/lib/libg2c.so </tt>
| |
− | *You probably need to <tt>ln -s /usr/lib/gcc/x86_64-redhat-linux/3.4.6/libgcc_s_32.so /lib/libgcc_s_32.so</tt>
| |
− | | |
− | === Installing root and enabling the xrootd service (needed for proof) ===
| |
− | | |
− | *on RHEL5 x86_64 systems: (gcc 4.3 is too advanced for UiO desktops)
| |
− | | |
− | <tt>tar -xvzf /mn/kvant/hep/linux/root/root_v5.22.00.Linux-slc5-gcc3.4.tar.gz -C /opt</tt>
| |
− | | |
− | *Assume standard setup is on default system (e.g. scalar.uio.no) and $node is the node you want to install on. Of course if you are logged on to $node all the ssh'ing is not needed | |
− | | |
− | <tt>scp /etc/sysconfig/xrootd $node:/etc/sysconfig/ <br>scp /etc/xpd.cf $node:/etc/<br>scp /etc/rc.d/init.d/xrootd $node:/etc/rc.d/init.d/ <br>ssh $node chkconfig --add xrootd<br>ssh $node chkconfig --level 35 xrootd on </tt>
| |
− | | |
− | *Note, xrootd runs under read account (as of May 2009)
| |
− | | |
− | <tt>ssh $node mkdir /var/log/xrootd <br>ssh $node chown read:fysepf /var/log/xrootd</tt>
| |
− | | |
− | *Edit /etc/xpd.cf and restart xrootd to add a worker node.
| |
− | *Redistribute /etc/cpd.cf as well (have to find a simpler but reliable system for this
| |
− | | |
− | <tt>/sbin/service xrootd start </tt>
| |
− | | |
− | <br>
| |
− | | |
− | === Installing VirtualBox ===
| |
− | | |
− | *Download and install the appropriate rpm from http://download.virtualbox.org/virtualbox | |
− | *Remove the new line with vboxusers from /etc/group
| |
− | *Add the host's username to the vboxusers group, e.g.
| |
− | | |
− | <tt>echo vboxusers:x:15522:esbenlu >> /etc/group<br>echo vboxusers:x:15522:esbenlu >> /etc/group.local </tt>
| |
− | | |
− | *Finalize the vbox setup:
| |
− | | |
− | <tt>/etc/init.d/vboxdrv setup </tt>
| |
− | | |
− | <br>
| |
− | | |
− | === Installing ARC client on RHEL5 boxes (as superuser) ===
| |
− | | |
− | *See http://download.nordugrid.org/repos.html | |
− | *Typical /etc/yum.repos.d/nordugrid: | |
− | | |
− | <tt>[nordugrid] name=NorduGrid - $basearch - stable</tt>
| |
− | | |
− | <tt>baseurl=http://download.nordugrid.org/repos/redhat/$releasever/$basearch/stable<br>enabled=1 gpgcheck=1<br>gpgkey=http://download.nordugrid.org/RPM-GPG-KEY-nordugrid </tt>
| |
− | | |
− | *<tt>yum groupinstall "ARC Client"</tt> to install the client s/w
| |
− | *<tt>yum install nordugrid-arc-ca-utils</tt> to install the missing Certificate Authority utilities
| |
− | *<tt>/opt/nordugrid/sbin/grid-update-crls</tt> to jumpstart the first update of the [http://searchsecurity.techtarget.com/sDefinition/0,,sid14_gci803160,00.html Certificate Revocation Lists] - after that there is a cron that does the job automatically.
| |
− | | |
− | === Installing an ATLAS software release ===
| |
− | | |
− | *Decide where to install the software - this is the "repository".
| |
− | *The install script is here: http://koherens.uio.no/atlas/install/installPacmanKit.sh. Download it somewhere and chmod u+x it.
| |
− | *A typical installation looks like | |
− | | |
− | <tt>mkdir {root of the software repository}/atlas/software/releases/15.2.0<br><br>cd {root of the software repository}/atlas/software/releases/15.2.0<br> </tt>
| |
− | | |
− | *If you download the install script in {root of the software repository}/atlas/software/releases/ then you do
| |
− | | |
− | <tt>../installPacmanKit.sh 15.2.0 I686-SLC4-GCC34-OPT {runtimedir} </tt>
| |
− | | |
− | *The <tt>{runtimedir}</tt> is set in <tt>/etc/arc.conf</tt> (normal users
| |
− | should create <tt>/<something>/APPS/HEP</tt> and use <tt>{runtimedir}=/<something></tt>. The I686-SLC4-GCC34-OPT downloads a kit built for this platform (which is the only one fully supported for the moment - SLC4 is RHEL4/CentOS 4-compatible, kits for x86_64 and RHEL5 are under development).
| |
− | | |
− | *If your OS is 64-bit there may be some missing 32-bit libraries, my "favorites" are from the blas, libgfortran and libf2c packages. The first thing I will do is run a kit validation, e.g. <tt>./KVsubmit nordugris.uit.no 15.2.0</tt> which will send a grid job to validate the kit (<tt>KVsubmit</tt> is in http://koherens.uio.no/atlas/install/KVsubmit if you want to try it yourself).
| |
− | | |
− | === ATLAS VO Registration and Management ===
| |
− | | |
− | [https://lcg-voms.cern.ch:8443/vo/atlas/vomrs?path=/RootNode&action=execute This site] is used for registering atlas VO grid resource users and for managing information about their affiliation with the ATLAS VO and their permissions regarding use of grid resources.<br>
| |