Revision as of 10:27, 4 October 2014

Introduction

Using IPython via ssh with X-forwarding is a really great way to work, but it can be a pain with the DISPLAY settings. The tricks outlined below have been really helpful for me and are now a part of my standard 'workflow'. For the most part, I assume Ubuntu (or some 'deb' package OS variant) and bash in my descriptions below. YMMV.

A way to preserve your DISPLAY environment

When working via ssh (and X forwarding) on IPython, sometimes your $DISPLAY environment variable gets mangled. One approach to deal with this is outlined below, but recently I found a new approach.

There is a program called xpra which creates a virtual monitor (x server) to which you can point your DISPLAY variable.

You can start a screen session with the DISPLAY setting pointing to this virtual display. Then when you run IPython (inside screen) anything sent to X-display is sent to the virtual environment. You can attach and detach to this environment and your GUIs / matplotlib windows, etc will remain alive.

To install xpra:

sudo apt-get install xpra

Then a session:

First, start a screen session pointing to a virtual display

xpra start :100
DISPLAY=:100 screen

Now you've started screen and should be "inside" screen with all your X display sent to :100. You can start Ipython in the screen session:

ipython

In another terminal, attach to the xpra display to 'see' the X programs:

xpra attach :100

You can detach from both these sessions, and they'll keep running, get home or wherever... reattach to screen and also reattach to your xpra virtual display. Good luck!

Another approach for working with SSH and GNU screen (helpful for Ipython)

Often you'll want to ssh to a server, start a job and leave. Knowing that you want the job to stay alive after you log out, you can just use:

nohup myjob.sh > nohup_output.nh &

But sometimes you'd rather have an actual term or shell session stay alive. This is often the case when working with IPython. The problem is that your DISPLAY environment variable may change, so that when you log into the machine later, what screen thinks is the present DISPLAY variable will no longer be current and you'll get errors.

My workaround for this has been the following:

1 On the host machine, that is the one you are logging into, in your .bash_profile (which gets read when you log in via ssh) you should add the line:

   echo "export DISPLAY=$DISPLAY" > .display.`whoami`.`hostname`

2 Again, on your host machine,make sure the following is in your .bashrc:

   ## set the prompt command to read the .disply file
   export PROMPT_COMMAND=". ~/.display.`whoami`.`hostname`"

What is happening here is that every time you log in, the .bash_profile file creates a new file in your home directory, specific to your user, and the hostname. Whenever you log out and log back in, that file is updated with the appropriate DISPLAY information. In the .bashrc file, we've created a PROMPT_COMMAND that will read that file every time you hit return in your shell. This can cause some annoyances if the file does not exist, for example if you use the 'su' command to become another user. However, overall it works quite well, such that when you return to a running screen session, the DISPLAY variable will be updated and you'll be able to send X-display windows back to your client machine.

A script for keeping track of screens

Often you may have several screen sessions running. It is recommended to start screen with the following command:

screen -S my_description

Where my_description is some string that has meaning to you as a 'session' identifier. If only one screen session is running then simply screen -r will reconnect. However, if you have more, things can get complicated. The following script is helpful in such a case:

This page contains the following errors:

error on line 1 at column 30: Unescaped '<' not allowed in attributes values 

Below is a rendering of the page up to the first error.

</parsererror></html>

!/bin/bash

filters the screen -ls output to show the sesssions

sessions=`screen -ls | sed -ne 's/space://' -ne 's/$(Attached)\|(Detached)\|(Multi, detached)\|(Multi, attached)$// p'`

echo $sessions
echo $sessions | wc -w

res=`echo "$sessions" | wc -w`

if "$res" != "0" then

       echo 
     echo "  CURRENT SESSIONS"
     echo "  ------------------------"
     #screen -ls | sed -ne 's/space://' -ne 's/\((Attached)\|(Detached)\)// p' | cat -n
     echo "$sessions" | cat -n
     echo "  ------------------------"
     echo

       #prompt for the session to join
     echo -n "  Reattach to session, or ENTER for None: "
     read session

       if $session != 0
     then

           #attach to specified session
         linenum=0
         name=`screen -ls | sed -ne 's/space://' -ne 's/\((Attached)\|(Detached)\|(Multi, detached)\|(Multi, attached)\)// p' |
         while read line
         do
          let "linenum += 1"
          if "$linenum" -eq "$session"
          then
                 echo $line
                 break
          fi
         done`
         shrtname=`echo $name | sed -e 's/space://' -e 's/(.*)//' -e 's/\t//g'`

           echo "Reattaching to: " $shrtname
         if "$name" != ""; then
             if  
                 #echo $shrtname
                 screen -r "$shrtname"
             then
                 echo -n " Bye bye screen.. Exit?[y] "
                 read nbye
                     if "$nbye" == ""
                     then 
                         exit
                     else
                         goodbye=$nbye
                     fi  
                     if "$goodbye" == "y"
                     then
                         exit
                     else
                         echo "What's next?"
                     fi  
             else
                 if  
                     # try multiuser connect
                     screen -Ax "$shrtname"
                 then
                     echo "Hope that was fun!"
                 else
                     echo "Trying to Force connection"
                     screen -D -r "$shrtname"
                 fi  
             fi  
         else
            echo "Could not reattach to $session"
         fi  
     else
         echo " Have fun..."
     fi

else

       echo "  No existing SCREEN session to reattach to..."

fi

This page contains the following errors:

error on line 1 at column 30: Unescaped '<' not allowed in attributes values 

Below is a rendering of the page up to the first error.

</parsererror></html>

Save this file in your $HOME/bin directory as 'screenlist' and make it executable: chmod +x screenlist. Then at the command prompt you can type:

[user@host ~]$screenlist

and you should get some output similar to:

  CURRENT SESSIONS
  ------------------------
     1  3841.coding     (09/26/2011 11:35:01 PM)
     2  3791.Ipython    (09/26/2011 11:34:42 PM)
     3  17716.test3     (09/26/2011 10:12:15 PM)
  ------------------------

  Reattach to session, or ENTER for None:

Difference between revisions of "WorkingOnServers/DisplayEnvironmentTricks"

Revision as of 10:27, 4 October 2014

Contents

Introduction

A way to preserve your DISPLAY environment

Another approach for working with SSH and GNU screen (helpful for Ipython)

A script for keeping track of screens

This page contains the following errors:

Below is a rendering of the page up to the first error.

This page contains the following errors:

Below is a rendering of the page up to the first error.

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools