Difference between revisions of "9. Retrieve historical ECMWF fields (ERA40) for FLEXPART"
(Created page with "'''''Retrieving ECMWF historcal grid data (example for ERA_40):''''' 1) Make sure your ECtrans setup settings on: https://ecaccess.ecmwf.int/ is valid. 2) When ssh'ing onto u...") |
|||
Line 1: | Line 1: | ||
− | '''''Retrieving ECMWF historcal grid data (example for ERA_40):''''' | + | '''''Retrieving ECMWF historcal grid data (example for ERA_40 or ERA-INTERIM):''''' |
+ | Under 7. Re | ||
− | |||
− | + | 3. Check that the file flex_ecmwf_91_global_1.0_ecgate contains the following: | |
− | + | (for an overview over the parameters and what they mean - see bottom of page) | |
− | + | ----------------------------------- | |
− | + | BEGIN: modification of config file | |
− | + | ----------------------------------- | |
− | + | cat <<EOF >CONTROL_ERA | |
− | + | DAY1 YYYYMMDD1 | |
− | + | DAY2 YYYYMMDD2 | |
− | + | DTIME 3 | |
− | + | '''FORCE_EPS 0 '''(ENSEMBLE) | |
− | + | '''FORCE_EI 0''' (ERA-INTERIM) | |
− | + | '''FORCE_ERA 0''' (ERA-40) | |
− | + | M_GRID 100 | |
− | + | M_LEFT -17800 | |
− | + | M_LOWER -9000 | |
− | + | M_UPPER 9000 | |
− | + | M_RIGHT 18100 | |
− | ''' | + | M_LEVEL 91 |
− | + | M_RESOL 255 | |
− | + | M_GAUSS 1 | |
− | + | M_ACCURACY 24 | |
− | ''' | + | M_OMEGA 0 |
− | + | M_OMEGADIFF 0 | |
− | + | M_SMOOTH 179 | |
− | + | M_ADDPAR /27/28/173/186/187/188/235/139/39 | |
− | + | M_FORMAT GRIB2 | |
− | + | GATEWAY ecaccess.ecmwf.int | |
− | + | DESTINATION flexpart (or change to another of your MS associations) | |
− | + | ECSTORAGE 1 | |
− | + | ECTRANS 1 | |
− | + | ECFSDIR ectmp:/${USER}/oper_YYYY_MM/ | |
− | + | MAILOPS ${USER} | |
− | + | MAILFAIL ${USER} | |
− | + | EXEDIR . | |
− | + | SOURCECODE /home/ms/no/sbc/flex_extract_ecgate_V4 (CHANGE TO YOUR USER!!) | |
− | + | EOF | |
− | + | ----------------------------------- | |
− | + | - END: modification of config file | |
− | + | ----------------------------------- | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | M_FORMAT GRIB2 | ||
− | |||
− | DESTINATION | ||
− | |||
− | ECFSDIR ectmp:/${USER}/ | ||
− | |||
− | SOURCECODE /home/ms/no/ | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 11:20, 12 March 2013
Retrieving ECMWF historcal grid data (example for ERA_40 or ERA-INTERIM):
Under 7. Re
3. Check that the file flex_ecmwf_91_global_1.0_ecgate contains the following:
(for an overview over the parameters and what they mean - see bottom of page)
BEGIN: modification of config file
cat <<EOF >CONTROL_ERA DAY1 YYYYMMDD1 DAY2 YYYYMMDD2 DTIME 3 FORCE_EPS 0 (ENSEMBLE) FORCE_EI 0 (ERA-INTERIM) FORCE_ERA 0 (ERA-40) M_GRID 100 M_LEFT -17800 M_LOWER -9000 M_UPPER 9000 M_RIGHT 18100 M_LEVEL 91 M_RESOL 255 M_GAUSS 1 M_ACCURACY 24 M_OMEGA 0 M_OMEGADIFF 0 M_SMOOTH 179 M_ADDPAR /27/28/173/186/187/188/235/139/39 M_FORMAT GRIB2 GATEWAY ecaccess.ecmwf.int DESTINATION flexpart (or change to another of your MS associations) ECSTORAGE 1 ECTRANS 1 ECFSDIR ectmp:/${USER}/oper_YYYY_MM/ MAILOPS ${USER} MAILFAIL ${USER} EXEDIR . SOURCECODE /home/ms/no/sbc/flex_extract_ecgate_V4 (CHANGE TO YOUR USER!!) EOF
- END: modification of config file