Difference between revisions of "Radionuclide Generator"

From mn/safe/nukwik
Jump to: navigation, search
(Explanation and Exercise Guide)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
The task in this Laboratory Exercise is to record a disintegration curve of <sup>234m</sup>Pa and from this curve determine the half-life of the nuclide. The <sup>234m</sup>Pa radionuclide is obtained from a generator system consisting of an ion exchanger column with fixed <sup>234</sup>Th where the daughter is milked by a liquid elution process. The -particles from the produced 234mPa-source is recorded by the GM-detector used in Laboratory Exercise 1.
+
The task in this Laboratory Exercise is to record a disintegration curve of <sup>234m</sup>Pa and from this curve determine the half-life of the nuclide. The <sup>234m</sup>Pa radionuclide is obtained from a generator system consisting of an ion exchanger column with fixed <sup>234</sup>Th where the daughter is milked by a liquid elution process. The &alpha; particles from the produced <sup>234m</sup>Pa-source is recorded by a GM-detector.  
 
 
This lab exercise was developed for the [[Course KJM 5911 - Laboratory Exercieses in Radio Chemistry (UiO)|UiO&nbsp;KJM 5911 course]]. The students will prepare a ion-exchange collumn using DOWEX-50 ion-exchange material and extract <sup>234</sup>Th from a <sup>234</sup>U solution. The thorium sticks to the ion exchanger and 1.17-min <sup>234</sup>Pa will grow inn. The column can be milked once every 12&nbsp;min. The students use <sup>234</sup>Pa samples to measure its half life.  
 
  
 
==== Learning&nbsp;Goals  ====
 
==== Learning&nbsp;Goals  ====
Line 16: Line 14:
 
*Student Guide - [[Principle Behind Mother-Daughter Relationship]]
 
*Student Guide - [[Principle Behind Mother-Daughter Relationship]]
  
'''Experimental'''  
+
'''Experimental procedure'''  
  
 +
*Student guide - [[Preparing solutions for 234mPa radionuclide generator]]
 
*Student guide - [[How to Make a 234mPa Radionuclide generator|making the <sup>234m</sup>Pa radionuklide generator]]  
 
*Student guide - [[How to Make a 234mPa Radionuclide generator|making the <sup>234m</sup>Pa radionuklide generator]]  
*Student guide - [[How to Measure the Half Life of 234mPa|how to measure the half life of <sup>234m</sup>Pa]]  
+
*Student guide - [[How to Measure the Half Life of 234mPa|how to measure the half life of <sup>234m</sup>Pa - old fashion with GM-probe]]
 +
*Student guide - [[How to Measure the Half Life of 234mPa - with MCA system|how to measure the half life of <sup>234m</sup>Pa - using an MCA with NaI]]  
 
*Student&nbsp;guide - [[Determining the Half Life of 234mPa|determining the half life of <sup>234m</sup>Pa]]  
 
*Student&nbsp;guide - [[Determining the Half Life of 234mPa|determining the half life of <sup>234m</sup>Pa]]  
 
*Instructions to teachers and supervisors
 
*Instructions to teachers and supervisors

Latest revision as of 21:34, 4 October 2012

The task in this Laboratory Exercise is to record a disintegration curve of 234mPa and from this curve determine the half-life of the nuclide. The 234mPa radionuclide is obtained from a generator system consisting of an ion exchanger column with fixed 234Th where the daughter is milked by a liquid elution process. The α particles from the produced 234mPa-source is recorded by a GM-detector.

Learning Goals

  • Understand mother-daughter relations and radioactive equilibrium
  • Understand how a radio-nuclide generator works and how it is used
  • Understand how radioactivity is "growing in"
  • Training in handling radioactive material and safety procedures

Explanation and Exercise Guide

Theory

Experimental procedure

Other

Equipment

  • HCl (MSDS) on 100 mL flasks, one for each student)
  • DOWEX 50x4 (MSDS) (50-100 mesh)
  • Uranyl Nitrate (MSDS) - UO2(NO3)2
  • NaAc (MSDS) + K4[Fe(CN)6] solution (on 100 mL flasks, one for each student) (prepared by mixing 8 g NaC2H3O2 and 40 g K4[Fe(CN)6 (MSDS)] in 1 L water)
  • 5% citric acid (MSDS) (on 100 mL flasks, one for each student)
  • 0.1 M AgNO3 (MSDS) (on 50 mL flasks)
  • Suitable columns which can be fitted with a stopper connected to a rubber ball so it can be pressurized (to quickly elute drops with short lived 234Pa from the column).
  • Stop watches (one for each student)
  • Sample holders to catch eluted drops from the colund and which can be mounted conveniently in the detector chamber
  • Detectors - GM counters works well, but we have also used plastic scintillators mounted on PMTs and NaI-detectors. High efficiency is necessary to get good counting statistics even after the first 5-6 minutes. 

Safety Aspects

  • Chemical safety - nothing particulary dangerous, 2 M HCl and 0.1 M AgNO3 should of course be handled according to normal safety precations. DOWEX residues and waste should be collected and handled according to normal procedures.
  • Rad. safety - very small amounts of uranyl nitrate is used, so rad. safety is mostly about regulations and not a real healt hazzard. Remember to collect the DOWEX from the ion-exchange collumns in separate containers as it is contaminated with 24-day 234Th (will be none-radioactive after one year).