Difference between revisions of "3D printing"
(Lagde guidelines for 3d printing) |
m |
||
Line 8: | Line 8: | ||
Ask Sonen staff or other users how to print, level the bed and/or change material on the printers. | Ask Sonen staff or other users how to print, level the bed and/or change material on the printers. | ||
− | === Using the | + | === Using the Formlabs without instruction is strictly forbidden === |
− | The | + | The Formlabs uses hazardous chemicals and unqualified users may put themselves and others at risk. |
− | === Print jobs should not | + | === Print jobs should not exceed 24 hours === |
− | Jobs | + | Jobs exceeding 24 hours will be aborted. <br> |
The longer the print, the likelier it will fail. <br> | The longer the print, the likelier it will fail. <br> | ||
You are not the only user of the printer. Show consideration for the other users of the 3D printer. Occupying the printer for a week is selfish. | You are not the only user of the printer. Show consideration for the other users of the 3D printer. Occupying the printer for a week is selfish. | ||
+ | |||
+ | Exceptions to this rule may be made per request. | ||
+ | |||
+ | === Use only one printer at a time === | ||
+ | Show consideration for others. Do not occupy all our printers. | ||
Exceptions to this rule may be made per request. | Exceptions to this rule may be made per request. | ||
Line 22: | Line 27: | ||
=== Pay attention to the first layer === | === Pay attention to the first layer === | ||
− | The most critical part of 3D printing is the first layer. Don't leave the printer | + | The most critical part of 3D printing is the first layer. Don't leave the printer until the first layer is done. |
=== non-profit printing only === | === non-profit printing only === | ||
− | Sonen is non-profit. 3D printing for profit and | + | Sonen is non-profit. 3D printing for profit and commercial purposes is prohibited. <br> |
− | Our printers may be used for projects and prototyping of ideas. However for | + | Our printers may be used for projects and prototyping of ideas. However for commercial ventures and resale of prints consider other services. |
=== Use the printer most suited to your purpose === | === Use the printer most suited to your purpose === | ||
− | Our printers serve specific purposes. Don't | + | Our printers serve specific purposes. Don't occupy the Prusa if you only print in one color. Don't print with the Formlabs if you could achieve the same result with an Ultimaker |
=== Don't make repairs to the printers === | === Don't make repairs to the printers === | ||
− | Should something be wrong with the printers, notify Sonen staff. | + | Should something be wrong with the printers, notify Sonen staff. Don't pull out a screwdriver and dismantle the printer. |
=== Have fun === | === Have fun === | ||
The most important rule when using our printers is to have fun. | The most important rule when using our printers is to have fun. |
Revision as of 07:38, 27 April 2023
These guidelines are intended to establish a common understanding of the use of our 3D printers. This is to avoid legal complications and conflicts of interest.
Contents
- 1 Guidelines
- 1.1 Don't use printers you are not proficient with
- 1.2 Using the Formlabs without instruction is strictly forbidden
- 1.3 Print jobs should not exceed 24 hours
- 1.4 Use only one printer at a time
- 1.5 Follow the SOP
- 1.6 Pay attention to the first layer
- 1.7 non-profit printing only
- 1.8 Use the printer most suited to your purpose
- 1.9 Don't make repairs to the printers
- 1.10 Have fun
Guidelines
Don't use printers you are not proficient with
If you are unfamiliar with 3D printing or a specific 3D printer, don't use it.
Ask Sonen staff or other users how to print, level the bed and/or change material on the printers.
Using the Formlabs without instruction is strictly forbidden
The Formlabs uses hazardous chemicals and unqualified users may put themselves and others at risk.
Print jobs should not exceed 24 hours
Jobs exceeding 24 hours will be aborted.
The longer the print, the likelier it will fail.
You are not the only user of the printer. Show consideration for the other users of the 3D printer. Occupying the printer for a week is selfish.
Exceptions to this rule may be made per request.
Use only one printer at a time
Show consideration for others. Do not occupy all our printers.
Exceptions to this rule may be made per request.
Follow the SOP
All of our printers come with an SOP. Make sure you have read, understood and follow the SOPs.
Pay attention to the first layer
The most critical part of 3D printing is the first layer. Don't leave the printer until the first layer is done.
non-profit printing only
Sonen is non-profit. 3D printing for profit and commercial purposes is prohibited.
Our printers may be used for projects and prototyping of ideas. However for commercial ventures and resale of prints consider other services.
Use the printer most suited to your purpose
Our printers serve specific purposes. Don't occupy the Prusa if you only print in one color. Don't print with the Formlabs if you could achieve the same result with an Ultimaker
Don't make repairs to the printers
Should something be wrong with the printers, notify Sonen staff. Don't pull out a screwdriver and dismantle the printer.
Have fun
The most important rule when using our printers is to have fun.