3D printing
These guidelines are intended to establish a common understanding of the use of our 3D printers. This is to avoid legal complications and conflicts of interest.
Contents
- 1 Guidelines
- 1.1 Don't use printers you are not proficient with
- 1.2 Using the formlabs without instruction is strictly forbidden
- 1.3 Print jobs should not exeed 12 hours
- 1.4 Follow the SOP
- 1.5 Pay attention to the first layer
- 1.6 non-profit printing only
- 1.7 Use the printer most suited to your purpose
- 1.8 Don't make repairs to the printers
- 1.9 Have fun
Guidelines
Don't use printers you are not proficient with
If you are unfamiliar with 3D printing or a specific 3D printer, don't use it.
Ask Sonen staff or other users how to print, level the bed and/or change material on the printers.
Using the formlabs without instruction is strictly forbidden
The formlabs uses hazardous chemicals and unqualified users may put themselves and others at risk.
Print jobs should not exeed 12 hours
Jobs exeeding 12 hours will be aborted.
The longer the print, the likelier it will fail.
You are not the only user of the printer. Show consideration for the other users of the 3D printer. Occupying the printer for a week is selfish.
Exceptions to this rule may be made per request.
Follow the SOP
All of our printers come with an SOP. Make sure you have read, understood and follow the SOPs.
Pay attention to the first layer
The most critical part of 3D printing is the first layer. Don't leave the printer untill the first layer is done.
non-profit printing only
Sonen is non-profit. 3D printing for profit and comercial purposes is prohibited.
Our printers may be used for projects and prototyping of ideas. However for comercial ventures and resale of prints consider other services.
Use the printer most suited to your purpose
Our printers serve specific purposes. Don't ocupy the prusa if you only print in one colour. Don't print with the formlabs if you could achieve the same result with an Ultimaker
Don't make repairs to the printers
Should something be wrong with the printers, notify Sonen staff. Dont pull out a screwdriver and dismantle the printer.
Have fun
The most important rule when using our printers is to have fun.