Difference between revisions of "Unresolved issues"
From mn.fysikk.laglivlab
(Tag: Visual edit) |
(Tag: Visual edit) |
||
Line 8: | Line 8: | ||
=== '''Air bubbles''' === | === '''Air bubbles''' === | ||
− | When filling chambers with liquid, the bubbles result in the cells dying prematurely | + | When filling chambers with liquid, the bubbles can result in the cells dying prematurely and/or inhibiting the flow. |
'''Possible solutions to air bubbles''' | '''Possible solutions to air bubbles''' |
Revision as of 21:19, 31 July 2022
There are several unresolved issues present when it comes to the experiment part of the project.
The following issues are:
Keeping the cells alive inside the chip
Controlling the CO2 levels
Air bubbles
When filling chambers with liquid, the bubbles can result in the cells dying prematurely and/or inhibiting the flow.
Possible solutions to air bubbles
- The chip design itself. By creating a design in which there are no sharp angles can reduce the chance of air bubbles adhering to the surface of the chamber.
- Adding soft surfacant to make sure the bubbles detach from the surface.
- Being highly aware of pressure levels when adding liquids to the chambers. Even the smallest changes in pressure can result in air bubbles.
- Bubble Trap for Microfluidics Kit provided by Elveflow which gets rid of the air bubbles before they enter the chip.
- Air bubbles and microfluidics: Tips and tricks to remove them