Difference between revisions of "Unresolved issues"
From mn.fysikk.laglivlab
(Tag: Visual edit) |
(Tag: Visual edit) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
The following issues are: | The following issues are: | ||
− | === Keeping the cells alive inside the chip | + | == Zimmer & Peacock pH sensor == |
+ | == Keeping the cells alive inside the chip == | ||
In order to achieve useful results | In order to achieve useful results | ||
− | + | '''Possible solutions:''' | |
+ | |||
+ | == Controlling the CO2 levels == | ||
Environment | Environment | ||
− | + | '''Possible solutions:''' | |
+ | |||
+ | == Air bubbles == | ||
When filling chambers with liquid, the bubbles can result in the cells dying prematurely and/or inhibiting the flow. | When filling chambers with liquid, the bubbles can result in the cells dying prematurely and/or inhibiting the flow. | ||
− | '''Possible solutions to air bubbles''' | + | '''Possible solutions to air bubbles:''' |
* The chip design itself. By creating a design in which there are no sharp angles can reduce the chance of air bubbles adhering to the surface of the chamber. | * The chip design itself. By creating a design in which there are no sharp angles can reduce the chance of air bubbles adhering to the surface of the chamber. | ||
* Adding soft surfacant to make sure the bubbles detach from the surface. | * Adding soft surfacant to make sure the bubbles detach from the surface. |
Latest revision as of 22:03, 9 August 2022
There are several unresolved issues present when it comes to the experiment part of the project.
The following issues are:
Contents
Zimmer & Peacock pH sensor
Keeping the cells alive inside the chip
In order to achieve useful results
Possible solutions:
Controlling the CO2 levels
Environment
Possible solutions:
Air bubbles
When filling chambers with liquid, the bubbles can result in the cells dying prematurely and/or inhibiting the flow.
Possible solutions to air bubbles:
- The chip design itself. By creating a design in which there are no sharp angles can reduce the chance of air bubbles adhering to the surface of the chamber.
- Adding soft surfacant to make sure the bubbles detach from the surface.
- Being highly aware of pressure levels when adding liquids to the chambers. Even the smallest changes in pressure can result in air bubbles.
- Bubble Trap for Microfluidics Kit provided by Elveflow which gets rid of the air bubbles before they enter the chip.
- Air bubbles and microfluidics: Tips and tricks to remove them
- Methods & techniques for perfusion cell culture