Difference between revisions of "Cleaning"
From mn.fysikk.laglivlab
(→Weekly cleaning) |
(→Weekly cleaning) |
||
Line 22: | Line 22: | ||
Every week the lab has to be cleaned. | Every week the lab has to be cleaned. | ||
* Move all loose pieces of equipment from lab benches into cupboards and drawers | * Move all loose pieces of equipment from lab benches into cupboards and drawers | ||
− | |||
* Wipe all surfaces (benches, PC, microscope, ...) with antibac | * Wipe all surfaces (benches, PC, microscope, ...) with antibac | ||
* Clean '''LAF bench/hood''' with antibac | * Clean '''LAF bench/hood''' with antibac |
Revision as of 13:23, 17 November 2023
Monthly cleaning and maintenance
- Standard items: Refill and order new if necessary
- Fridge: Clean and remove items without labels
- Vacusafe: Empty when half full
- Incubator: Refill sterile water
List of things to check regularly in 431
- Sterile water: Always at least one full bottle of autoclaved water
- 75% alcohol spray: Always at least one full spray flask of 75% alcohol
- DMEM ++: Always one half full bottle of DMEM supplied with extras
- Yellow waste container: full, clean then thoroughly before taking them in the lab
- sticky mat: Check that sticky mat sticks
- Diluted PBS: When the diluted PBS bottle is less than half full prepare another
- CO2: Check the CO2 level in bottles. Reorder bottle if necessary.
- Pasteur pipettes: Always at least 20 sterile Pasteur pipettes in hood, if not: autoclave new
- Coats: Every semester: replace coats
- Water: Change water in distilled water small containers
Weekly cleaning
Every week the lab has to be cleaned.
- Move all loose pieces of equipment from lab benches into cupboards and drawers
- Wipe all surfaces (benches, PC, microscope, ...) with antibac
- Clean LAF bench/hood with antibac
- Leave only minimum equipment in hood
- Remove the base of the bench and clean in the sink
- Clean under the base
- Clean the inside of the glass sides (windows)
- Reassemble
- Turn on the UV light
- Clean inside the centrifuge
- First clean with distilled water
- Then clean with ethanol
- Clean all tube holders with ethanol
- Mop the floor
- Spray "what is touched" (handles etc...)