Difference between revisions of "Bioactuator group 2023"
(→This is a page dedicated to Bioactuator's student group that was active in 2023.) (Tag: Visual edit) |
(Tag: Visual edit) |
||
| Line 1: | Line 1: | ||
This is a page dedicated to Bioactuator's student group that was active in 2023. | This is a page dedicated to Bioactuator's student group that was active in 2023. | ||
| + | |||
| + | <nowiki>#</nowiki> Set-up Test | ||
| + | |||
| + | Participants: Emilie Haugland Solheim, Silje Vik, Sander Iden | ||
| + | |||
| + | Created By: Emilie Haugland Solheim | ||
| + | |||
| + | Type: Lab, Passaging | ||
| + | |||
| + | Created: May 27, 2023 6:44 PM | ||
| + | |||
| + | Last Edited Time: May 27, 2023 7:38 PM | ||
| + | |||
| + | Agenda: | ||
| + | |||
| + | - Passaging | ||
| + | |||
| + | - Testing electrodes in the six-well plate with growth medium and shapes | ||
| + | |||
| + | Testing with a sinus-signal of 1 Hz frequency and an amplitude of 11.5 Vpp, 1st try: | ||
| + | |||
| + | - During testing, there was a layer of something (goop?) growing on the electrodes. Maybe caused by electrolysis (which we don’t want)? | ||
| + | |||
| + | - Time: about 1 min (short time) | ||
| + | |||
| + | - A picture (Bubbles_from_around_electrodes_after_stimulation.png) was taken of the ‘goop’ that grew on the eletrodes. This looked like bubbles, and might be a ‘mild’ electrolysis. | ||
| + | |||
| + |  | ||
| + | |||
| + | Testing with a sinus-signal of 1 Hz frequency and an amplitude of 11.5 Vpp, 2nd try: | ||
| + | |||
| + | - Did the same again, but filming it (with Sanders phone). Same result as the 1st try. | ||
| + | |||
| + | - Video: | ||
| + | |||
| + | Testing with a square-signal of 1 Hz frequency and an amplitude of 11.5 Vpp, 1st try: | ||
| + | |||
| + | - Short time again (~1 min) | ||
| + | |||
| + | - Same happened. Same result as 1st and 2nd try with the sinus-signal. | ||
| + | |||
| + | Comments: | ||
| + | |||
| + | - Wish: Get new electrodes of same material and thickness (that are fit for medical use/in Vitro) | ||
Revision as of 14:14, 7 March 2024
This is a page dedicated to Bioactuator's student group that was active in 2023.
# Set-up Test
Participants: Emilie Haugland Solheim, Silje Vik, Sander Iden
Created By: Emilie Haugland Solheim
Type: Lab, Passaging
Created: May 27, 2023 6:44 PM
Last Edited Time: May 27, 2023 7:38 PM
Agenda:
- Passaging
- Testing electrodes in the six-well plate with growth medium and shapes
Testing with a sinus-signal of 1 Hz frequency and an amplitude of 11.5 Vpp, 1st try:
- During testing, there was a layer of something (goop?) growing on the electrodes. Maybe caused by electrolysis (which we don’t want)?
- Time: about 1 min (short time)
- A picture (Bubbles_from_around_electrodes_after_stimulation.png) was taken of the ‘goop’ that grew on the eletrodes. This looked like bubbles, and might be a ‘mild’ electrolysis.
Testing with a sinus-signal of 1 Hz frequency and an amplitude of 11.5 Vpp, 2nd try:
- Did the same again, but filming it (with Sanders phone). Same result as the 1st try.
- Video:
Testing with a square-signal of 1 Hz frequency and an amplitude of 11.5 Vpp, 1st try:
- Short time again (~1 min)
- Same happened. Same result as 1st and 2nd try with the sinus-signal.
Comments:
- Wish: Get new electrodes of same material and thickness (that are fit for medical use/in Vitro)
