Difference between revisions of "20210430 photolitho"
From mn.fysikk.laglivlab
Dagkd@uio.no (talk | contribs) |
Dagkd@uio.no (talk | contribs) |
||
Line 5: | Line 5: | ||
** 3700 RPM ~ 20 um | ** 3700 RPM ~ 20 um | ||
** prebake on programmable hot plate | ** prebake on programmable hot plate | ||
+ | ** Masking with UV-Kub 2. UV at 11% intensity for 30 sec. | ||
+ | ** Hot plate too hot, 65C postbake happened at 72C | ||
* 2nd wafer 3100 RPM ~ 25 um | * 2nd wafer 3100 RPM ~ 25 um | ||
** prebake on VWR hot plate, no nice control of ramp in temp | ** prebake on VWR hot plate, no nice control of ramp in temp | ||
+ | ** Masking with UV-Kub 2. UV at 11% intensity for 30 sec. | ||
+ | ** Postbake on VWR hotplate |
Revision as of 11:16, 30 April 2021
- Started LAF-bench
- N2 valve had been left open, almost no pressure left!
- cleaned wafers with plasma only
- 1st wafer
- 3700 RPM ~ 20 um
- prebake on programmable hot plate
- Masking with UV-Kub 2. UV at 11% intensity for 30 sec.
- Hot plate too hot, 65C postbake happened at 72C
- 2nd wafer 3100 RPM ~ 25 um
- prebake on VWR hot plate, no nice control of ramp in temp
- Masking with UV-Kub 2. UV at 11% intensity for 30 sec.
- Postbake on VWR hotplate