Difference between revisions of "10.02.23"
From mn.fysikk.laglivlab
(Tag: Visual edit) |
(Tag: Visual edit) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
==== <u>Pre-notes:</u> ==== | ==== <u>Pre-notes:</u> ==== | ||
− | - The goal is to demonstrate that our setup produces | + | - The goal is to demonstrate that our setup produces reproducable rotation spectra, so we hope that the results today are similar to those from the experiments at [[28.10.22]] and [[07.02.23]]. |
+ | |||
+ | - Consider asking about a new nitrogen tank to use in cleaning the chip. | ||
+ | |||
+ | - 0.4 ml of water more than necessary added to solution by accident, may affect electrical conductivity in medium and results. The chip was also washed with distilled water because we're missing isopropanol. | ||
==== Results (rotations per 10sec): ==== | ==== Results (rotations per 10sec): ==== | ||
Line 55: | Line 59: | ||
|0 | |0 | ||
|} | |} | ||
+ | Notes: | ||
+ | |||
+ | - No turning point, spectra possibly affected by additional water. |
Latest revision as of 19:03, 10 February 2023
Present: Lasse, Elizabeth, Lynn, Felix
Pre-notes:
- The goal is to demonstrate that our setup produces reproducable rotation spectra, so we hope that the results today are similar to those from the experiments at 28.10.22 and 07.02.23.
- Consider asking about a new nitrogen tank to use in cleaning the chip.
- 0.4 ml of water more than necessary added to solution by accident, may affect electrical conductivity in medium and results. The chip was also washed with distilled water because we're missing isopropanol.
Results (rotations per 10sec):
Each row for a clip is a different cell.
10kHz | 100kHz | 200kHz | 500kHz | 1MHz | 5Mhz | 10MHz | 20MHz | 30MHz | 40MHz | 50MHz |
---|---|---|---|---|---|---|---|---|---|---|
0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Notes:
- No turning point, spectra possibly affected by additional water.