Difference between revisions of "20220308 photolitho"
From mn.fysikk.laglivlab
Dagkd@uio.no (talk | contribs) |
Dagkd@uio.no (talk | contribs) |
||
Line 1: | Line 1: | ||
Started 08:30 following procedure. | Started 08:30 following procedure. | ||
− | * New box of 3" wafers, cleaned with IP and N2, | + | * New box of 3" wafers, cleaned 2 wafers with IP and N2, |
* plasma cleaning ~3 min (100 on timer setting) 100% | * plasma cleaning ~3 min (100 on timer setting) 100% | ||
− | * on VWR hot plate 09:30 set to 150C | + | * on VWR hot plate 09:30 set to 150C, 10 min |
+ | * SU8 from syringe (40 ml left) | ||
+ | * Spread at 400, 40s, set 1760, reading 1690 40s -> 50 um | ||
+ | * 2 small dust specs on second wafer, 1st wafer seemed fine | ||
+ | * Put on to programmable hot plate | ||
+ | * Hot plate started heating too early, relaxation after spinning only 5-10 min | ||
+ | * 15 min @ 65 C, 120 min @ 95 C, started 10:30 |
Revision as of 11:55, 8 March 2022
Started 08:30 following procedure.
- New box of 3" wafers, cleaned 2 wafers with IP and N2,
- plasma cleaning ~3 min (100 on timer setting) 100%
- on VWR hot plate 09:30 set to 150C, 10 min
- SU8 from syringe (40 ml left)
- Spread at 400, 40s, set 1760, reading 1690 40s -> 50 um
- 2 small dust specs on second wafer, 1st wafer seemed fine
- Put on to programmable hot plate
- Hot plate started heating too early, relaxation after spinning only 5-10 min
- 15 min @ 65 C, 120 min @ 95 C, started 10:30